|
Product Details:
|
| Features: | Heat Protection, Welding Protection | Width: | 100, 120, 130, 150, 160, 180, 200cm |
|---|---|---|---|
| Total Weight: | 430g/m2+15g/m2 Coaiting Per Side | Total Thickness: | 0.45mm |
| Weave: | Twill | Basic Cloth: | 3732 Fiberglass Fabric |
| Yarn Typer: | E-glass Or C-glass | ||
| High Light: | bulk fiberglass cloth roll,fibreglass cloth roll |
||
0.45mm PU Coated Fiberglass Fabric Cloth For Shopping Mall Smoke Curtain
1. Description:
Polyurethane-coated fiberglass fabric is a woven fiberglass cloth substrate that has been coated on one side or both two sides with a specially compounded grey polyurethane coating. Mass per unit of this PU-coated glass fabric is about 460g/m2. The base cloth is cross twill weave 3732 fabric. It is 430g/m2 and 0.43mm thick. When coated with 15-20g/m2 grey PU coating on each side, the total weight per unit can be 460gsm, and thickness will be 0.45mm.
One special property of PU-coated fiberglass cloth is able to resist instantaneous temperature up to 1100 degrees Celsius. Although the normal working temperature is 260 degrees. This kind of material is a very suitable material for welding sparks/spatter shield, good for fire/welding blanket/curtain. At the same time, coated fiberglass fabric also has some special properties like chemical corrosion resistance, electrical insulation, high strength, no itchy, rich colors.
2. Table 1: TDS for Basic Cloth
| 3732 Fiberglass Cloth | |||
| Item Model | 3732 Fiberglass Fabric | ||
| Description | E-glass Industrial Fabric | ||
| Weave Structure | 1/3 Twill Weave | ||
| Weight | 430gsm | ||
| Thickness | 0.43mm | 0.017 inch | |
| Yarn Type | Warp | EC9 68 1*2 | ECG 75 1/2 |
| Weft | EC9 68 1*2 | ECG 75 1/2 | |
| Thread Count | Warp | 18±1 ends/cm | 45 Per Inch |
| Weft | 12±1 picks/cm | 33 Per Inch | |
| Break Strength | Warp | 6000 N/5cm | 666 lbs/inch |
| Weft | 4500 N/5cm | 500 lbs/in | |
| LOI | < 5% | ||
| Working Temperature | ≤550℃ | ||
3. Table 2: Pu Coated Fiberglass Cloth Information
| Item | 3732 Pu Coated Fiberglass Cloth |
| Total Weight | 460 g/m2 |
| Thickness | 0.45 mm |
| Color | Grey White (Other colors need to be customized) |
| Working Temperature |
Coating: -50℃ to +260℃ instantaneously up to 1100℃ |
| Coating | Polyurethane Coating On Both Sides |
| Width | 100cm, 120cm, 130cm, 150cm, 160cm, 180cm, 200cm |
4. Properties:
15-20g/m2 PU coating on both sides
Pu coating can be born 1100℃ instantaneously
Acid resistance, chemical corrosion resistance
Heat resistant, resist high temperature below 260℃
5. Application:
Welding Spatter Shield
Ductwork Connector
Thermal Insulation Jacket and Exhaust Blanket
Fire and Smoke Control System, like Smoke Curtain, Fire Curtain
6. Much More Choice for PU coating:
According to different usage scenarios, we also provide blended fibers fabric and other coated choices.
| Type | Thickness | Weight |
| 3732 with Double-sided Pu Coating | 0.5mm | 460±20 |
| 3732 with Double-sided Silicone Coating | 0.5mm | 540±20 |
| 3734 with Double-sided Pu Coating | 0.5+mm | 510±20 |
| 3734 with Double-sided Silicone Coating | 0.5+mm | 590±20 |
| Stainless Steel Wire Insert Fiberglass cloth with Double-sided Pu Coating | 0.6mm | 650±20 |
| 800 with Double-sided Pu Coating | 0.8mm | 820±30 |
| 800 with Double-sided Silicone Coating | 0.8mm | 950±30 |
| Other thicknesses can be customized according to your Requirements | ||
7. Detail Images for PU Coated Fiberglass Cloth
Contact Person: Mr. Angelo Cheng
Tel: 86 13776220396
Fax: 86-512-52565400
